On the road again (Day One) — Near Gaither Mountain Overlook (Arkansas) — The first major scenic overlook of our trip. Two-minute read, +2
Fujifilm X-E3
Pictures taken with my Fujifilm X-E3. This is the third Fujifilm Camera I’ve bought, and the best so far.
The northern edge of the Llano Estacado in New Mexico. On state Highway 469. Annular Eclipse Trip Day Two.
October 12, 2023 17:26
The northern edge of the Llano Estacado in New Mexico. On state Highway 469.
October 12, 2023 17:25
Scenic stop — If we’d checked the map, we would have discovered an amphitheater nearby. On state Highway 469.
October 12, 2023 17:22
The northern edge of the Llano Estacado in New Mexico. On state Highway 469.
October 12, 2023 17:21
Canadian River, south of Logan, New Mexico.
October 12, 2023 16:24
Ginger sitting on the edge of the bluff overlooking the Canadian River, south of Logan, New Mexico.
October 12, 2023 16:23
Day Two — Canadian River Railroad Bridge. Logan, New Mexico. We spent last night in Dodge City, then headed down to Texas, went across Texas and into New Mexico. And why not? It bagged me a new state.
October 12, 2023 16:22
Sparkle Zone color. There’s a reason why we call this room of our house the ‘Sparkle Zone.’ +1
October 10, 2023 16:49
Testing, testing. One, two, three — Two outpatient visits to the hospital today for some tests. Ultrasound in the morning, and my annual cardiology checkup in the afternoon. All my results were good. In a little experiment, I used AI to obfuscate the personal information in the image. It makes a nice change from pixelating it.
October 3, 2023 10:09
Bowed — before I threw away the bowed worktop I’d set aside as a workbench top, I decided to check how bad it was: 5/16-inch over 36 inches. No, I wasn’t going to be able to use it for anything, so into the trash, it went.
October 1, 2023 12:04
Table saw cart — completed (for now). That’s another job finished. As I hoped, the dust collection seems to work well. I also made a zero clearance saw blade insert for the saw. 2
September 19, 2023 20:00
Building my table saw cart. One-minute read, +4
September 11, 2023 13:39
New workbench storage — I have finally updated the storage area above my workbench. There used to be five plastic cat litter boxes on the shelf. I made these five wood boxes in an afternoon, so the finish isn’t furniture level, but they fit the space well and look much better. 2
September 8, 2023 9:10
Hitachi C10FR Table Saw — My next project. It’s a very well-used worksite jobbing saw, and it is time to make some improvements.
September 8, 2023 9:08
Hibiscus — Hollywood. Our hibiscuses have generally been a bit ‘Meh’ this year, so this one stood out. The blue tinge is due to reflected skylight, not coloring.
September 1, 2023 13:29
Doorstop — another test shot to get a feel of the workflow with the new storage and table.
September 1, 2023 10:09
Knife — A quick test of the new photography table. Jim gave me the knife a few months ago. The piece of driftwood was washed up on the Baltic coast and is amazingly lightweight.
September 1, 2023 9:55
Set up for a quick test — I used a small hand-held fill in light for the test pictures. It has finely adjustable color temperature and brightness.
September 1, 2023 9:35
Sparkle Zone Storage Center, Stage Two, almost complete — Some final adjustments to the bottom doors to be made. There is still some minor work and finishing touches to be completed. Apart from that, all done. +5
August 31, 2023 9:09
A costly mistake… At $70 per door, and I ruined two doors before I realized my error. I forgot to allow for the Inset panel (at 3/16-inch) when selecting screws to mount the doors on cross braces. That brings my ‘Cock-up Account’ up to $200 in a couple of months (don’t ask).
August 30, 2023 9:40
Sparkle Zone Storage Center, Stage One, almost complete. Now for the fiddly bit of the end panel and the ‘fill-in’ panels. That big gap — that’s a special space, and will be Stage Two!
August 26, 2023 17:47
It fits — Carcasses fitted to the wall, this, and fitting the doors is the easy bit.
August 26, 2023 14:06
Will it work? Dry fit. Just eyeballing it to make sure we like the use of space, and checking I hadn’t messed up my size calculations.